PARK34-45W/120/PIR/BL
PARK34-45W/120/PIR/BL
- IP65 Rated
- 100,000-Hour LED lifespan
- 5-Year, limited warranty
Performance
| Watts | 45W |
| Color Temp | 5000K (Cool) |
| Lumens | 5,629 lm |
| Efficacy | 124.5 |
| Color Accuracy | 76 CRI |
| L70 Lifespan | 100,000 Hours |
| Type | Constant Current |
| 120V | 0.38A |
| 208V | |
| 240V | |
| 277V | |
| Input Watts | 45.2W |
Dimensions
Weight: 2.1 lbs
Technical Specifications
Compliance
UL Listed
Suitable for wet locations
IP Rating
Ingress protection rating of IP65 for dust and water
Trade Agreements Act Compliant
This product is a product of Cambodia and a "designated country" end product that complies with the Trade Agreements Act
DLC Listed
This product family is listed with the DesignLights Consortium (DLC). Individual SKUs within this family may carry either a DLC Standard or DLC Premium qualification. Please refer to the individual product specification sheet or the DLC Qualified Products List (QPL) at designlights.org to confirm the qualification status of a specific SKU prior to specification or purchase.
LED Characteristics
LEDs
Long-life, high-efficacy, surface-mount LEDs
Electrical
Driver
Driver on board, Class B, 50/60 Hz, 120V: 0.38A
Dimming Driver
Integrated/embedded reverse Phase-Cut stepped luminaire-level dimming control. Ten discrete dimming steps plus off and full on are accomplished by modification of the voltage, current, and waveform to produce varying light output. Controller is remote located from fixture or junction box or can be located by the electrical panel.
THD
4.94% at 120V
Power Factor
99.4% at 120V
Surge Protection
3kA
Performance
Lifespan
100,000-Hour LED lifespan based on IESlm-80 results and TM-21 calculations
Wattage Equivalency
Equivalent to 175W Metal Halide
Construction
Cold Weather Starting
The minimum starting temperature is -40°F (-40°C)
Maximum Ambient Temperature
Suitable for use in up to 104°F (40°C)
Sensor Settings
Maximum Mounting Height
13 ft
Voltage
5V
Dimming
Default factory setting: 30% dimming output
Operating Temperature
-20°C to 60°C (-4°F to 140°F)
Storage Temperature
20°C- 70°C (-40°F - 158°F)
Operating Humidity
5% - 93% without condensation
IP Rating
IP20
Warm Up Time
45s +/-5s
Standby (w)
<0.3W
Module Interaction
Wire AWG 22 (Grey Dim -, Purple Dim +, Yellow 5V DC)
Bi-Level
The sensor will dim the fixture down to 30% after a 20 minute vacancy delay, and then go full bright again when motion is detected.
Other
5-Year Limited Warranty
The RAB 5-year, limited warranty covers light output, driver performance and paint finish. RAB's warranty is subject to all terms and conditions found at rablighting.com/warranty.
Recently Viewed Products
RWLED3T125RG/BL
Roadway Lights 14891 Lumens Type Iii 125W 5000K 120V-277V With Adaptor Bi-Level Roadway Gray
RWLED3T125RG/480/PCT4
Roadway Lights 14996 Lumens Type Iii 125W 5000K 480V With Adaptor Twistlock Photocell Roadway Gray
RWLED3T78Y/480/PCT4
Roadway Lights 9053 Lumens Type Iii 78W 3000K 480V With Adaptor Twistlock Photocell Bronze
LOT4T65/480/D10/PCT4
Area Lights 8317 Lumens Lotblaster 65W Type Iv 0-10V Dimming 480V Twistlock Photocell Bronze
LOT3T65N/480/D10/7PR
Area Lights 8214 Lumens Lotblaster 65W 4000K Type Iii 0-10V Dimming 480V 7-Pin Receptacle Bronze
RWLED3T125RG/BL
Roadway Lights 14891 Lumens Type Iii 125W 5000K 120V-277V With Adaptor Bi-Level Roadway Gray
RWLED3T125RG/480/PCT4
Roadway Lights 14996 Lumens Type Iii 125W 5000K 480V With Adaptor Twistlock Photocell Roadway Gray
RWLED3T78Y/480/PCT4
Roadway Lights 9053 Lumens Type Iii 78W 3000K 480V With Adaptor Twistlock Photocell Bronze
