RBAY17SHO/E
130W Field Adjustable 4000/5000K
- 100,000-Hour LED lifespan
- DLC Premium Listed
- 0-10V dimming, standard
- 5-Year, limited warranty
Performance
| Watts | 130/100/80W |
| Color Temp | Field Adjustable 4000/5000K |
| Lumens | 13335-20799 lm |
| Efficacy | 152.8-162.2 lm/W |
| Color Accuracy | 84-85 CRI |
| L70 Lifespan | 100,000 Hours |
| Type | Constant Current |
| 120V | 1.33A/1.00A/0.82A |
| 208V | 0.78A/0.60A/0.49A |
| 240V | 0.68A/0.53A/0.43A |
| 277V | 0.60A/0.47A/0.39A |
| Input Watts | 82.2-135.1W |
Dimensions
Technical Specifications
Field Adjustability
Field Adjustable
Field Adjustable Light Output:
130W/100W/80W (factory default 130W)
Color temperature selectable by 4000K and 5000K (factory default 4000K)
130W/100W/80W (factory default 130W)
Color temperature selectable by 4000K and 5000K (factory default 4000K)
Compliance
UL Listed
Suitable for damp locations
IESNA LM-79 & LM-80 Testing
RAB LED luminaires and LED components have been tested by an independent laboratory in accordance with IESNA LM-79 and LM-80.
IP Rating
IP20
DLC Listed
This product is listed by Design Lights Consortium (DLC) as an ultra-efficient premium product that qualifies for the highest tier of rebates from DLC Member Utilities. Designed to meet DLC 5.1 requirements.
DLC Product Code: S-8NRCDF
DLC Product Code: S-8NRCDF
LED Characteristics
LEDs
Long-life, high-efficacy, discrete, surface-mount LEDs
Color Uniformity
RAB's range of Correlated Color Temperature follows the guidelines of the American National Standard for Specifications for the Chromaticity of Solid State Lighting (SSL) Products, ANSI C78.377-2017.
Performance
Lifespan
100,000-Hour LED lifespan based on IES LM-80 results and TM-21 calculations
Electrical
Driver
Constant Current, Class1, 120-277V, 50/60 Hz:
130W: 120V: 1.33A, 208V: 0.78A, 240V: 0.68A, 277V 0.60A
100W: 120V: 1.00A, 208V: 0.60A, 240V: 0.53A, 277V 0.47A
80W: 120V: 0.82A, 208V: 0.49A, 240V: 0.43A, 277V 0.39A
130W: 120V: 1.33A, 208V: 0.78A, 240V: 0.68A, 277V 0.60A
100W: 120V: 1.00A, 208V: 0.60A, 240V: 0.53A, 277V 0.47A
80W: 120V: 0.82A, 208V: 0.49A, 240V: 0.43A, 277V 0.39A
Dimming Driver
Driver includes dimming control wiring for 0-10V dimming systems. Requires separate 0-10V DC dimming circuit. Dims down to 10%.
THD
5.28% at 120V, 8.36% at 277V
Power Factor
99.8% at 120V, 95.8% at 277V
Surge Protection
L-N: 10 kV
L/N-GND: 6 kV
L/N-GND: 6 kV
Battery Backup
Battery backup will operate the LED Lamp for 90 minutes if power fails. Wired for 120V-277V.
Battery Backup Light Loss Factor
130W: 6.66%
100W: 8.36%
80W: 10.58%
100W: 8.36%
80W: 10.58%
Construction
Cold Weather Starting
The minimum starting temperature is 0°C (32°F)
Maximum Ambient Temperature w/Battery Backup
Suitable for use in up to 113°F (45°C)
Reflector
Polycarbonate
Housing
Die-cast aluminum
Finish
Formulated for high durability and long-lasting color
Green Technology
Mercury and UV free. RoHS-compliant components.
Installation
Mounting
Comes standard with V-hooks for chain mounting. Accessories available for pendant and surface mounting (purchased separately).
Sensor Settings
Remote Control Accessory
Adjust settings using remote control (catalog# MSR1). Only available with 0-10V dimming driver options. Remote control available here.
Other
5-Year Limited Warranty
The RAB 5-year, limited warranty covers light output, driver performance and paint finish. RAB's warranty is subject to all terms and conditions found at rablighting.com/warranty.
Recently Viewed Products
WPLED4T50FXW/D10/LC
Wall Packs 7517 Lumens Wpled Type Iv 50W 5000K Flat Wall Mount 0-10V Dimming Lightcloud Controller White
RDDLED2S-10D-30YY-B-BTL
Recessed Downlights 866 Lumens Rddled 2 Inches Square 10W Dimmable 30 Degree 2700K 80Cri Black Trim Cone Black Trim Ring Trimless
