SLIM17FAFC100
SLIM17FAFC100
- Selectable CCT
- Full cutoff
- Selectable on/off photocell
- 0-10V dimming, standard
Performance
| Watts | 100W |
| Color Temp | 3000/4000/5000K |
| Lumens | 13,780/15,088/14,505 lm |
| Efficacy | 135.25/153.33/142.89 lm/W |
| Color Accuracy | 84/86/83 CRI |
| L70 Lifespan | 100,000 Hours |
| Type | Constant Current |
| 120V | 0.85A |
| 208V | 0.49A |
| 240V | 0.42A |
| 277V | 0.38A |
| Input Watts | 101.89/98.4/101.5W |
Dimensions
Weight: 10.6 lbs
Technical Specifications
Field Adjustability
Field Adjustable
Color temperature selectable by 3000K, 4000K and 5000K (factory default 4000K)
Compliance
UL Listed
Suitable for Wet Locations. Wall Mount Only.
IESNA LM-79 & LM-80 Testing
RAB LED luminaires and LED components have been tested by an independent laboratory in accordance with IESNA LM-79 and LM-80.
IP Rating
Ingress protection rating of IP65 for dust and water
DLC Listed
This product family is listed with the DesignLights Consortium (DLC). Individual SKUs within this family may carry either a DLC Standard or DLC Premium qualification. Please refer to the individual product specification sheet or the DLC Qualified Products List (QPL) at designlights.org to confirm the qualification status of a specific SKU prior to specification or purchase.
Performance
Lifespan
100,000-Hour LED lifespan based on IESlm-80 results and TM-21 calculations
Wattage Equivalency
Equivalent to 400W Metal Halide
LED Characteristics
LEDs
Long-life, high-efficiency, surface-mount LEDs
Electrical
Driver
Constant Current, Class 1, 120-277V, 50/60 Hz, 120V: 0.85A, 208V: 0.49A, 240V: 0.42A, 277V: 0.38A
Dimming Driver
Driver includes dimming control wiring for 0-10V dimming systems. Requires separate 0-10V DC dimming circuit. Dims down to 10%.
THD
9.53% at 120V, 6.12% at 277V
Power Factor
99.5% at 120V,, 95.6% at 277V
Photocell
120-277V selectable photocell that can be turned on and off.
Surge Protection
L/N: 6 kV, L/N-PE: 6 kV
Dim to Off
Yes
Aux Power Supply
Yes
Construction
IK Rating
IK08 Protected against 5 joules of impact. Equivalent to the impact of a 3.75 lbs. (1.7kg) mass dropped from 11.8" (300mm) above the impacted surface.
Cold Weather Starting
The minimum starting temperature is -40°F (-40°C)
Ambient Temperature
Max Power Temp Rating: 122°F ( 50°C)
Middle Power Temp Rating: 122°F ( 50°C))
Low Power Temp Rating: 122°F ( 50°C)
Middle Power Temp Rating: 122°F ( 50°C))
Low Power Temp Rating: 122°F ( 50°C)
Housing
Precision die-cast aluminum housing and door frame
Lens
Polycarbonate lens
Cut Off
Full cutoff (0°)
Gaskets
High-temperature silicone
Finish
Formulated for high durability and long-lasting color
Green Technology
Mercury and UV free. RoHS-compliant components.
Installation
Mounting
Hinged wiring access and conduit entries on the back, sides, top and bottom make installation a snap
Other
5-Year Limited Warranty
The RAB 5-year, limited warranty covers light output, driver performance and paint finish. RAB's warranty is subject to all terms and conditions found at rablighting.com/warranty.
Recently Viewed Products
IVAT5S-45LSF730GU/WS
Area Lights 4550 Lumens Ivat5S Type V Square 38W Slipfitter Mount 70Cri 3000K Roadway Gray 120V-277V 0-10V Dimming 8 Feet Lens Wattstopper Sensor
HALV10L940-MC-CU
Architectural 230 Lumens Halv Forward Light 14W 90Cri 4000K Metallic Spun Copper Lens Copper Finish
RDLED2S8-30YN-TLB
Recessed Downlights 684 Lumens Rdled2S8 2 Inch Square 8W 30 Degree Beam Spread 80Cri 3500K Trimless Black Trim Ring
GN3LED26NRADG
Decorative 839 Lumens Gooseneck 26W 4000K Up Curve 30 Inches High & 25 Inches From The Wall Angled Dome Rectangular 15 Inches Green
IVAT5S-45LSF730GU/WS
Area Lights 4550 Lumens Ivat5S Type V Square 38W Slipfitter Mount 70Cri 3000K Roadway Gray 120V-277V 0-10V Dimming 8 Feet Lens Wattstopper Sensor
HALV10L940-MC-CU
Architectural 230 Lumens Halv Forward Light 14W 90Cri 4000K Metallic Spun Copper Lens Copper Finish
RDLED2S8-30YN-TLB
Recessed Downlights 684 Lumens Rdled2S8 2 Inch Square 8W 30 Degree Beam Spread 80Cri 3500K Trimless Black Trim Ring
