T8-15-48P-830-DIR
T8-15-48P-830-DIR
- Direct Replacement for Fluorescent Lamps: F32T8/32W, F32T8/30W, F32T8/28W, F32T8/25W
- Easy to install plug and play that requires no rewiring, no tools, no instructions
- 50,000 hour Lifespan
- Rated for use in enclosed and open fixtures in dry or damp locations
- Diffused frosted lens will maintain the same light quality over time
- Compatible with most instant start electronic T8 ballasts, Please check Compatibility List
- Approximately 40% more efficient than fluorescent T8 lamps
- Instant on full brightness
- Environmentally friendly, no mercury used
- NSF Listed: NSF/ANSI Standard 2 - Food Equipment - Splash Zone (Not for Direct Food Zone without additional fixture considerations)
- Shatterproof rugged thermoplastic nano-polycarbonate design
- Compatible with RAB specified 0-10V dimming system
Performance
| Watts | 15W |
| Color Temp | 3000K (Warm White) |
| Lumens | 2,000 lm |
| Efficacy | 133.3 lm/W |
| Color Accuracy | 80 CRI |
| L70 Lifespan | 50,000 Hours |
| Input Voltage | Ballast Dependent |
| Power Factor | Ballast Dependent |
| Flicker | N/A |
| THDi | N/A |
Dimensions
Weight: 0.6 lbs
Technical Specifications
Performance
Product Type
Linear
Input Wattage
15W
Lumens
2,000lm
Efficacy
133lm/W
L70 Lifespan
50,000 Hours
Wattage Equivalency
32W Fluorescent
Construction
Material
Plastic
Shape
T8
Nominal Length
4 ft
Finish
Frosted
For Use Outdoors in Open Fixtures
No
LED Characteristics
Color Temperature
3000K Warm White
Color Accuracy (CRI)
80 CRI
Beam Angle
160°
Installation
Base Type
G13
Installation Type
Type A, Plug and Play
Electrical
THD
<25%
Power Factor
Ballast Dependent
Operating Temperature
-20°C to 45°C (-4°F to 113°F)
Dimming
Yes with 0-10V dimmer + ballast. See Dimmer Compatibility List.
Input Voltage
Ballast Dependent
Operating Frequency
Ballast Dependent
Input Current @ 120V
Ballast Dependent
Input Current @ 277V
Ballast Dependent
Flicker
Ballast Dependent
Compliance
UL Listed
Yes
NSF Listed
Meets NSF/ANSI standards for use in Food Zone (non-contact), Splash, and Non-Food Zones. Tube guard required in open fixtures.
Certification Model Number
T8-15-48P-830-DIR
California Energy Commission (CEC) Status
Lawful for Sales in California
Application
Suitable for damp locations and totally enclosed fixtures.
DLC Listed
This product family is listed with the DesignLights Consortium (DLC). Individual SKUs within this family may carry either a DLC Standard or DLC Premium qualification. Please refer to the individual product specification sheet or the DLC Qualified Products List (QPL) at designlights.org to confirm the qualification status of a specific SKU prior to specification or purchase.
Recently Viewed Products
RDDLED2S-10D-30N-B-SAT
Recessed Downlights 917 Lumens Rddled 2 Inches Square 10W Dimmable 30 Degree 4000K 80Cri Black Trim Cone Satin Nickel Trim Ring 1/2 Inch Trim
HIDFA-115S-V-EX39-8CCT-BYP/5SP
Hid Replacement Field Adjustable 8700/11600/16675 Lumens 60/80/115W Ex39 80Cri 3Cct Ballast Bypass 5-Pin Sensor Port
HALVS10L940-GL-S/LC/E2
Architectural 249 Lumens Halvs Forward & Up/Down Light 14W 90Cri 4000K Green Leaves Lens Silver Finish Lightcloud Controller Battery Backup
GN1LED13YSACS
Decorative 664 Lumens Gooseneck 13W 3000K 24 Inches Arm Angled Cone Spot Reflector 15 Inches Silver
RDDLED2S-10D-30N-B-SAT
Recessed Downlights 917 Lumens Rddled 2 Inches Square 10W Dimmable 30 Degree 4000K 80Cri Black Trim Cone Satin Nickel Trim Ring 1/2 Inch Trim
HIDFA-115S-V-EX39-8CCT-BYP/5SP
Hid Replacement Field Adjustable 8700/11600/16675 Lumens 60/80/115W Ex39 80Cri 3Cct Ballast Bypass 5-Pin Sensor Port
