T8-6-24G-840-DIR
T8-6-24G-840-DIR
- Direct Replacement for Fluorescent Lamps: F32T8/32W, F32T8/30W, F32T8/28W, F32T8/25W
- Easy to install plug and play that requires no rewiring, no tools, no instructions
- 50,000 hour Lifespan
- Rated for use in enclosed and open fixtures in dry or damp locations
- Diffused frosted lens will maintain the same light quality over time
- Compatible with most instant start electronic T8 ballasts, see Ballast Compatibility List
- Approximately 40% more efficient than fluorescent T8 lamps
- Instant on full brightness
- Environmentally friendly, no mercury used
- NSF Listed: NSF/ANSI Standard 2 - Food Equipment - Splash Zone (Not for Direct Food Zone without additional fixture considerations)
- Dimmable, see Dimmer Compatibility List
Performance
| Watts | 6W |
| Color Temp | 4000K (Cool White) |
| Lumens | 900 lm |
| Efficacy | 150 lm/W |
| Color Accuracy | 82 CRI |
| L70 Lifespan | 50,000 Hours |
| Input Voltage | Ballast Dependent |
| Power Factor | Ballast Dependent |
| Flicker | N/A |
| THDi | N/A |
Dimensions
Weight: 0.3 lbs
Technical Specifications
Performance
Product Type
Linear
Input Wattage
6W
Lumens
900lm
Efficacy
150lm/W
L70 Lifespan
50,000 Hours
Wattage Equivalency
17W Fluorescent
Construction
Material
Glass
Shape
T8
Nominal Length
2 ft
Finish
Frosted
For Use Outdoors in Open Fixtures
No
LED Characteristics
Color Temperature
4000K Cool White
Color Accuracy (CRI)
82 CRI
Beam Angle
180°
Installation
Base Type
G13
Installation Type
Type A, Plug and Play
Electrical
THD
<25%
Power Factor
Ballast Dependent
Operating Temperature
-20°C to 45°C (-4°F to 113°F)
Dimming
Yes with 0-10V dimmer + ballast. See Dimmer Compatibility List.
Input Voltage
Ballast Dependent
Operating Frequency
Ballast Dependent
Input Current @ 120V
Ballast Dependent
Input Current @ 277V
Ballast Dependent
Flicker
≤40%
Other
5-Year, No-Compromise Warranty
RAB warrants that our LED products will be free from defects in materials and workmanship for a period of five (5) years from the date of delivery to the end user, including coverage of light output, color stability, driver performance and fixture finish. RAB's warranty is subject to all terms and conditions found at rablighting.com/warranty.
Compliance
UL Listed
Yes
NSF Listed
Meets NSF/ANSI standards for use in Food Zone (non-contact), Splash, and Non-Food Zones. Tube guard required in open fixtures.
Certification Model Number
T8-6-24G-840-DIR
California Energy Commission (CEC) Status
Lawful for Sales in California
Application
Suitable for damp locations and totally enclosed fixtures.
DLC Listed
This product family is listed with the DesignLights Consortium (DLC). Individual SKUs within this family may carry either a DLC Standard or DLC Premium qualification. Please refer to the individual product specification sheet or the DLC Qualified Products List (QPL) at designlights.org to confirm the qualification status of a specific SKU prior to specification or purchase.
Recently Viewed Products
IVAT2-100LSF730GU/WS2/LC
Area Lights 10167 Lumens Ivat2 Type Ii 94W Slipfitter Mount 70Cri 3000K Roadway Gray 120V-277V 0-10V Dimming 20 Feet Lens Wattstopper Sensor Lightcloud Controller
VANLED65FFR/WS2
Canopy Lights 8504 Lumens Vanled 65W 5000K Flat Frosted Lens 277V Wattstopper Sensor Bronze
ALED4T78SFYRG/480/D10/WS4
Arealights 9927 Lumens Aled Type Iv Slipfitter 3000K 78W 480V 0-10V Dimming Multi-Level Sensor With 40 Feet Lens Roadway Gray
GN3LED13NSAD11BL
Decorative 589 Lumens Gooseneck 13W 4000K Up Curve 30 Inches High & 25 Inches From The Wall Angled Dome Spot Reflector 11 Inches Royal Blue
IVAT2-100LSF730GU/WS2/LC
Area Lights 10167 Lumens Ivat2 Type Ii 94W Slipfitter Mount 70Cri 3000K Roadway Gray 120V-277V 0-10V Dimming 20 Feet Lens Wattstopper Sensor Lightcloud Controller
VANLED65FFR/WS2
Canopy Lights 8504 Lumens Vanled 65W 5000K Flat Frosted Lens 277V Wattstopper Sensor Bronze
