TOSN
TOSN
- Flexible, wet location LED tape provides energy-efficient lighting for both indoor and outdoor applications.
- Field-cuttable every 1.97" for shorter runs with a max run of 32ft. Can be linked with connectors (sold separately)
- Easy installation to most surfaces by using pre-attached 3M® double-sided tape
- Available in Static White 2700K, 3000K, 4000K
- 60W & 96W indoor or outdoor rated drivers available (sold separately)
- 60W & 96W indoor or outdoor rated drivers available (sold separately)
Performance
| Watts | 2.5 W/FTW |
| Color Temp | 4000K |
| Lumens | 275lm/ft lm |
| Efficacy | 110 |
| Color Accuracy | 90 CRI |
| L70 Lifespan | 50,000 Hours |
| Type | Constant Voltage |
| 120V | 19 mA/LED |
| 208V | |
| 240V | |
| 277V | |
| Input Watts | 2.5 W/ftW |
Dimensions
Weight: 0.9 lbs
Technical Specifications
Performance
Product Type
Wet Location SMD Tape Static White
Description
FLEXTAPE are bendable, outdoor LED tapes providing energy-efficient lighting for both indoor and outdoor applications.
Input Wattage
2.5 W/FT
Lumens
250lm/ft±10%
Efficacy
110lm/W±10%
L70 Lifespan
50,000-Hour LED lifespan based on IES LM-70 results
Electrical
Dimmable
PWM Dimming Signal, dimmable down to .1% with LED Driver(sold separately)
Operating Temperature
-4°F to 113°F (-20°C to 45°C)
LED Characteristics
Beam Angle
120°
Color Temperature
4000K
Color Accuracy (CRI)
90 CRI
R9 Value
High color performance with R9 greater than 50
Color Consistency
<5-step (2700K &5000K);<7-step (3000/3500/4000K) MacAdam Ellipse binning to achieve consistent fixture-to-fixture color
Installation
Field Cuttable Increment
Cuttable every 2.19"
Mounting
Easy installation to most surfaces by using pre-attached 3M® double-sided tape
Construction
Length
32.8 ft, 10M
Light Source
SMD LED White
Material Construction
Weather reisistant high=grade silicone cover with super flexible bending
Light Effect
Soft linear lighting performance
Compliance
Listings
UL Listed
Environment
Suitable for use indoors and outdoors in dry, damp, or wet environments.
IP Rating
Ingress protection rating of IP67 for dust and water
California Energy Commission (CEC) Status
Lawful for Sales in California
IESNA LM-79 & LM-80 Testing
RAB LED luminaires and LED components have been tested by an independent laboratory in accordance with IESNA LM-79 and LM-80.
FCC
Complies with Part 15 of the FCC Rules
Other
Field Wiring Accessories
TOJ2 - 2-pin outdoor connector kit
TPF2 - 2-pin power feed kit
TPF2 - 2-pin power feed kit
Mounting Accessories
TAP12 - 12mm wide aluminum channel kits
TSC2 - Silicone mounting clipos
TSC2 - Silicone mounting clipos
Compatible Drivers
TID-60 - Indoor 60W Driver
TID-96 - Indoor 96W Driver
TOD-96 - Outdoor 96W Driver
TID-96 - Indoor 96W Driver
TOD-96 - Outdoor 96W Driver
5-Year Limited Warranty
The RAB 5-year, limited warranty covers light output, driver performance and paint finish. RAB's warranty is subject to all terms and conditions found at rablighting.com/warranty.
Recently Viewed Products
RDDLED2R-10D-20N-S-ST
Recessed Downlights 1018 Lumens Rddled 2 Inches Round 10W Dimmable 20 Degree 4000K 80Cri Specular Trim Cone Silver Trim Ring 1/2 Inch Trim
VANLED20NFFRW/LC
Canopy Lights 3114 Lumens Vanled 20W 4000K Flat Frosted Lens Lightcloud Controller White
RDDLED2R-10D-20N-S-ST
Recessed Downlights 1018 Lumens Rddled 2 Inches Round 10W Dimmable 20 Degree 4000K 80Cri Specular Trim Cone Silver Trim Ring 1/2 Inch Trim
