ALED2T105SFK/480/D10/7PR
ALED2T105SFK/480/D10/7PR
- 66% energy cost savings vs. HID
- 100,000-hour LED lifespan
- 5-Year, No-Compromise Warranty
Performance
| Watts | 105W |
| Color Temp | 5000K (Cool) |
| Lumens | 12,980 lm |
| Efficacy | 118.9 lm/W |
| Color Accuracy | 70 CRI |
| L70 Lifespan | 100,000 Hours |
| Type | Constant Current |
| 120V | |
| 208V | |
| 240V | |
| 277V | |
| Input Watts | 109.2W |
Dimensions
Weight: 32.0 lbs
Technical Specifications
Compliance
UL Listed
Suitable for wet locations
IP Rating
Ingress protection rating of IP66 for dust and water
IESNA LM-79 & LM-80 Testing
RAB LED luminaires and LED components have been tested by an independent laboratory in accordance with IESNA LM-79 and LM-80.
Performance
Lifespan
100,000-Hour LED lifespan based on IES LM-80 results and TM-21 calculations
Wattage Equivalency
Replaces 320W Metal Halide
Construction
IES Classification
The Type II distribution is ideal for wide walkways, on ramps and entrance roadways, bike paths and other long and narrow lighting applications. This type is meant for lighting larger areas and usually is located near the roadside. This type of lighting is commonly found on smaller side streets or jogging paths.
Maximum Ambient Temperature
Suitable for use in up to 40°C (104°F)
Cold Weather Starting
The minimum starting temperature is -40°C (-40°F)
Thermal Management
Superior thermal management with external "Air-Flow" fins
Lens
Tempered glass lens
Housing
Die-cast aluminum housing, lens frame and mounting arm
Reflector
Specular vacuum-metallized polycarbonate
Gaskets
High-temperature silicone gaskets
Bracket EPA
2.0.
Finish
Formulated for high durability and long-lasting color
Green Technology
Mercury and UV free. RoHS-compliant components.
LED Characteristics
LEDs
Multi-chip, high-output, long-life LEDs
Color Stability
LED color temperature is warrantied to shift no more than 200K in color temperature over a 5-year period
Color Uniformity
RAB's range of Correlated Color Temperature follows the guidelines of the American National Standard for Specifications for the Chromaticity of Solid State Lighting (SSL) Products, ANSI C78.377-2017.
Electrical
Dimming Driver
Driver includes dimming control wiring for 0-10V dimming systems. Requires separate 0-10V DC dimming circuit. Dims down to 10%. See dimmer compatibility guide here.
THD
15.2% at 480V
Power Factor
90.8% at 480V
Ballast Volts
480V
Surge Protection
4kV
7-Pin Receptacle with Shorting Cap
ANSI C136.41 7-pin receptacle, compatible with wireless control systems
Installation
Mounting
Heavy-duty 1/2" thread mounting arm with "O" ring seal & stainless steel screws
Other
5-Year, No-Compromise Warranty
RAB warrants that our LED products will be free from defects in materials and workmanship for a period of five (5) years from the date of delivery to the end user, including coverage of light output, color stability, driver performance and fixture finish. RAB's warranty is subject to all terms and conditions found at rablighting.com/warranty.
Optical
BUG Rating
B2 U0 G2
Recently Viewed Products
A34T3LSF/MVS
A34-L T3 250/200/150W 3000K/4000K/5000K Slipfitter Mount Microwave Occupancy Sensor Bronze
RDDLED2S-10D-30NHC-M-SATL
Recessed Downlights 827 Lumens Rddled 2 Inches Square 10W Dimmable 30 Degree 4000K 90Cri Matte Trim Cone Satin Nickel Trim Ring Trimless
SMSBULLET2X12YA
Outdoor Sensors 2502 Lumens Smartbullet 2 X 12W Warm 3K Led 120V With Sms500 Cu4 Hood Bronze
CDLED2WU-10W-40D927-W
Cylinders 699 Lumens Cdled 10W 2 Inches Wall Indirect (Uplight) Only 90Cri 2700K Matte White
A34T3LSF/MVS
A34-L T3 250/200/150W 3000K/4000K/5000K Slipfitter Mount Microwave Occupancy Sensor Bronze
RDDLED2S-10D-30NHC-M-SATL
Recessed Downlights 827 Lumens Rddled 2 Inches Square 10W Dimmable 30 Degree 4000K 90Cri Matte Trim Cone Satin Nickel Trim Ring Trimless
SMSBULLET2X12YA
Outdoor Sensors 2502 Lumens Smartbullet 2 X 12W Warm 3K Led 120V With Sms500 Cu4 Hood Bronze
CDLED2WU-10W-40D927-W
Cylinders 699 Lumens Cdled 10W 2 Inches Wall Indirect (Uplight) Only 90Cri 2700K Matte White
