T8-6-24P-850-DIR
T8-6-24P-850-DIR
- Direct Replacement for Fluorescent Lamps: F32T8/32W, F32T8/30W, F32T8/28W, F32T8/25W
- Easy to install plug and play that requires no rewiring, no tools, no instructions
- 50,000 hour Lifespan
- Rated for use in enclosed and open fixtures in dry or damp locations
- Diffused frosted lens will maintain the same light quality over time
- Compatible with most instant start electronic T8 ballasts, Please check Compatibility List
- Approximately 40% more efficient than fluorescent T8 lamps
- Instant on full brightness
- Environmentally friendly, no mercury used
- NSF Listed: NSF/ANSI Standard 2 - Food Equipment - Splash Zone (Not for Direct Food Zone without additional fixture considerations)
- Shatterproof rugged thermoplastic nano-polycarbonate design
- Compatible with RAB specified 0-10V dimming system
Performance
| Watts | 6W |
| Color Temp | 5000K (Daylight) |
| Lumens | 900 lm |
| Efficacy | 150 lm/W |
| Color Accuracy | 80 CRI |
| L70 Lifespan | 50,000 Hours |
| Input Voltage | Ballast Dependent |
| Power Factor | Ballast Dependent |
| Flicker | N/A |
| THDi | N/A |
Dimensions
Weight: 0.2 lbs
Technical Specifications
Performance
Product Type
Linear
Input Wattage
6W
Lumens
900lm
Efficacy
150lm/W
L70 Lifespan
50,000 Hours
Wattage Equivalency
17W Fluorescent
Construction
Material
Plastic
Shape
T8
Nominal Length
2 ft
Finish
Frosted
For Use Outdoors in Open Fixtures
No
LED Characteristics
Color Temperature
5000K Daylight
Color Accuracy (CRI)
80 CRI
Beam Angle
180°
Installation
Base Type
G13
Installation Type
Type A, Plug and Play
Electrical
THD
<25%
Power Factor
Ballast Dependent
Operating Temperature
-20°C to 45°C (-4°F to 113°F)
Dimming
Yes with 0-10V dimmer + ballast. See Dimmer Compatibility List.
Input Voltage
Ballast Dependent
Operating Frequency
Ballast Dependent
Input Current @ 120V
Ballast Dependent
Input Current @ 277V
Ballast Dependent
Flicker
Ballast Dependent
Other
5-Year, No-Compromise Warranty
RAB warrants that our LED products will be free from defects in materials and workmanship for a period of five (5) years from the date of delivery to the end user, including coverage of light output, color stability, driver performance and fixture finish. RAB's warranty is subject to all terms and conditions found at rablighting.com/warranty.
Compliance
UL Listed
Yes
NSF Listed
Meets NSF/ANSI standards for use in Food Zone (non-contact), Splash, and Non-Food Zones. Tube guard required in open fixtures.
Certification Model Number
T8-6-24P-850-DIR
California Energy Commission (CEC) Status
Lawful for Sales in California
Application
Suitable for damp locations and totally enclosed fixtures.
DLC Listed
This product is on the Design Lights Consortium (DLC) Qualified Products List and is eligible for rebates from DLC Member Utilities.
DLC Product Code: PL8LHOBU8LBY
DLC Product Code: PL8LHOBU8LBY
Recently Viewed Products
ALED4T50YRG/480/D10/PCT4
Arealights 7315 Lumens Aled Type Iv 8In Pole Arm 3000K 50W 480V 0-10V Dimming Twistlock Photocell Roadway Gray
IVAT5S-45LSF750KH/7PR
Area Lights 5881 Lumens Ivat5S Type V Square 38W Slipfitter Mount 70Cri 5000K Black 347-480V 0-10V Dimming 7-Pin Receptacle
LOT2T160W/D10/7PR
Area Lights 21547 Lumens Lotblaster 160W Type Ii 0-10V Dimming 120V-277V 7-Pin Receptacle White
ALED4T50YRG/480/D10/PCT4
Arealights 7315 Lumens Aled Type Iv 8In Pole Arm 3000K 50W 480V 0-10V Dimming Twistlock Photocell Roadway Gray
IVAT5S-45LSF750KH/7PR
Area Lights 5881 Lumens Ivat5S Type V Square 38W Slipfitter Mount 70Cri 5000K Black 347-480V 0-10V Dimming 7-Pin Receptacle
LOT2T160W/D10/7PR
Area Lights 21547 Lumens Lotblaster 160W Type Ii 0-10V Dimming 120V-277V 7-Pin Receptacle White
