TIC/DW
TIC/DW
- Continuous band of flawless light output with no pixelated hot spots - even without a lens
- Field-cuttable every 1.97" for shorter runs with a max run of 32ft. Can be linked with connectors (sold separately)
- Easy installation to most surfaces by using pre-attached 3M® double-sided tape
- 60W & 96W indoor or outdoor rated drivers available (sold separately)
- 50,000hr rated life, Title 24 Compliant, and 5 Year Warranty
Performance
| Watts | 2.5 W/FTW |
| Color Temp | Dim to Warm |
| Lumens | 225m/ft lm |
| Efficacy | 75 |
| Color Accuracy | 90 CRI |
| L70 Lifespan | 50,000 Hours |
| Type | Constant Voltage |
| 120V | 4 mA/chip |
| 208V | |
| 240V | |
| 277V | |
| Input Watts | 2.5 W/ftW |
Dimensions
Weight: 0.5 lbs
Technical Specifications
Performance
Product Type
No-Pixel COB Tape Static White
Damp Rated
Description
ARCTAPE is a flexible COB tape with a continuous band of flawless light output with no pixelated hot spots - even without a lens.
Input Wattage
2.5 W/FT
Lumens
225lm/ft±10%
Efficacy
75lm/W±10%
L70 Lifespan
50,000-Hour LED lifespan based on IESlm-70 results
Electrical
Dimmable
PWM Dimming Signal, dimmable down to .1% with LED Driver(sold separately)
Operating Temperature
-4°F to 113°F (-20°C to 45°C)
LED Characteristics
Beam Angle
150°
Color Temperature
1800K-3000K Dim-to-Warm
Color Accuracy (CRI)
90 CRI
R9 Value
High color performance with R9 greater than 50
Color Consistency
<5-step (2700K &5000K);<7-step (3000/3500/4000K) MacAdam Ellipse binning to achieve consistent fixture-to-fixture color
Installation
Field Cuttable Increment
Cuttable every 1.97"
Mounting
Easy installation to most surfaces by using pre-attached 3M® double-sided tape
Construction
Length
32.8 ft, 10M
Light Source
COB LED White
Material Construction
Super flexible bending, ultra thin appearance, premium wall structure & thick copper to ensure consistancy in voltage and brightness
Light Effect
Continuous band light output with no pixelated hot spots
Compliance
Listings
UL Listed
Environment
Suitable for use indoors in dry and damp environments.
IP Rating
IP20
California Energy Commission (CEC) Status
Lawful for Sales in California
IESNA LM-79 & LM-80 Testing
RAB LED luminaires and LED components have been tested by an independent laboratory in accordance with IESNAlm-79 andlm-80.
RoHS
Mercury and UV free. RoHS-compliant components.
Environment Rating
IP20
FCC
Complies with Part 15 of the FCC Rules
Other
Field Wiring Accessories
TJ2/DW - 2pin indoor connector kits for dim to warm
Mounting Accessories
TAP12 - 12mm wide aluminum channel kits
Compatible Drivers
TID-60 - Indoor 60W Driver
TID-96 - Indoor 96W Driver
TOD-96 - Outdoor 96W Driver
TID-96 - Indoor 96W Driver
TOD-96 - Outdoor 96W Driver
5-Year Limited Warranty
The RAB 5-year, limited warranty covers light output, driver performance and paint finish. RAB's warranty is subject to all terms and conditions found at rablighting.com/warranty.
Recently Viewed Products
GN5LED13YSACI
Decorative 664 Lumens Gooseneck 13W 3000K Pole 20 Inches High & 19 Inches From Pole Angled Cone Spot Reflector 15 Inches Ivory
GN3LED26NSADB
Decorative 839 Lumens Gooseneck 26W 4000K Up Curve 30 Inches High & 25 Inches From The Wall Angled Dome Spot 15 Inches Black
IVAT4-75LSF750ZH/WS4
Area Lights 8040 Lumens Ivat4 Type Iv 67W Slipfitter Mount 70Cri 5000K Bronze 347-480V 0-10V Dimming 40 Feet Lens Wattstopper Sensor
GN5LED13YSACI
Decorative 664 Lumens Gooseneck 13W 3000K Pole 20 Inches High & 19 Inches From Pole Angled Cone Spot Reflector 15 Inches Ivory
GN3LED26NSADB
Decorative 839 Lumens Gooseneck 26W 4000K Up Curve 30 Inches High & 25 Inches From The Wall Angled Dome Spot 15 Inches Black
IVAT4-75LSF750ZH/WS4
Area Lights 8040 Lumens Ivat4 Type Iv 67W Slipfitter Mount 70Cri 5000K Bronze 347-480V 0-10V Dimming 40 Feet Lens Wattstopper Sensor
