U6-18-830-SE-BYP
U6-18-830-SE-BYP
- Replacement for conventional fluorescent T8 and T12 linear tubes
- Integral Driver enables lamp to be wired directly to line voltage without need for an external driver or ballast
- Approximately 50% more energy efficient when compared to Fluorescent T8 lamps
- Works with non-shunted sockets ONLY
- Separate wiring harness and socket kit accessory available
- 50,000 hour Lifespan
- Rated for use in enclosed and open fixtures in dry or damp locations
- Diffused frosted lens will maintain the same light quality over time
- Instant on full brightness
- Environmentally friendly, no mercury used
- NSF Listed: NSF/ANSI Standard 2 - Food Equipment - Splash Zone (Not for Direct Food Zone without additional fixture considerations)
- Compatible with RAB specified 0-10V dimming system
Performance
| Watts | 18W |
| Color Temp | 3000K (Warm White) |
| Lumens | 2,100 lm |
| Efficacy | 116.7 lm/W |
| Color Accuracy | 82 CRI |
| L70 Lifespan | 50,000 Hours |
| Input Voltage | 100-277V |
| Power Factor | 0.9 |
| Flicker | N/A |
| THDi | N/A |
Dimensions
Weight: 0.9 lbs
Technical Specifications
Performance
Product Type
Linear
Input Wattage
18W
Wattage Equivalency
32W Fluorescent
Lumens
2,100lm
Efficacy
117lm/W
L70 Lifespan
50,000 Hours
Dimming
Compatible with RAB specified 0-10V dimming system. Dimming capabilities were tested and verified on dimmable via an external accessory dimming system.
Construction
Material
Glass
Bulb Shape
U-Bent
Nominal Length
U6
Finish
Frosted
Base Type
2G13
For Use Outdoors in Open Fixtures
No
LED Characteristics
Color Temperature
3000K Warm White
Color Accuracy (CRI)
82 CRI
Electrical
THD
<20%
Power Factor
0.9
Operating Temperature
-20°C to 45°C (-4°F to 113°F)
Input Voltage
100-277V
Operating Frequency
50/60Hz
Other
Warranty
RAB warrants that our LED products will be free from defects in materials and workmanship for a period of five (5) years from the date of delivery to the end user, including coverage of light output, color stability, driver performance and fixture finish. RAB's warranty is subject to all terms and conditions found at rablighting.com/warranty.
Installation
Installation Type
Type B, Single Ended wiring
Compliance
UL Recognized
Yes
UL Classified
Yes
NSF Listed
Meets NSF/ANSI standards for use in Food Zone (non-contact), Splash, and Non-Food Zones. Tube guard required in open fixtures.
Certification Model Number
U6-18-830-SE-BYP
California Energy Commission (CEC) Status
Lawful for Sales in California
Application
Suitable for damp locations and totally enclosed fixtures.
DLC Listed
This product is on the Design Lights Consortium (DLC) Qualified Products List and is eligible for rebates from DLC Member Utilities. Designed to meet DLC 5.1 requirements.
DLC Product Code: PNP23A0T
DLC Product Code: PNP23A0T
Recently Viewed Products
IVAT4-100LWM740WH/WS
Area Lights 11269 Lumens Ivat4 Type Iv 94W Wall Mount 70Cri 4000K White 347-480V 0-10V Dimming 8 Feet Lens Wattstopper Sensor
IVAT5S-100LWM730KU/7PR
Area Lights 10032 Lumens Ivat5S Type V Square 94W Wall Mount 70Cri 3000K Black 120V-277V 0-10V Dimming 7-Pin Receptacle
ALED4T125RG/D10/PCT
Arealights 16328 Lumens Aled Type Iv 8In Pole Arm 5K 125W 120V-277V 0-10V Dimming Twistlock Photocell Roadway Gray
HALV18L940-CS-CU
Architectural 465 Lumens Halv Forward Light 25W 90Cri 4000K Crush Sedona Lens Copper Finish
IVAT4-100LWM740WH/WS
Area Lights 11269 Lumens Ivat4 Type Iv 94W Wall Mount 70Cri 4000K White 347-480V 0-10V Dimming 8 Feet Lens Wattstopper Sensor
IVAT5S-100LWM730KU/7PR
Area Lights 10032 Lumens Ivat5S Type V Square 94W Wall Mount 70Cri 3000K Black 120V-277V 0-10V Dimming 7-Pin Receptacle
