VBR200DG
VBR200DG
- Set screw keeps guard securely in place
- All stainless steel hardware
- Close-up plugs allow Phillips or slotted screwdrivers for easy installation
- High temperature silicone internal gaskets
- Premium porcelain socket with 150C 8" long leads attached
Performance
| Watts | 200W |
| Color Temp | |
| Lumens | |
| Efficacy | |
| Color Accuracy | |
| L70 Lifespan |
| Type | |
| 120V | |
| 208V | |
| 240V | |
| 277V | |
| Input Watts |
Dimensions
Weight: 4.0 lbs
Technical Specifications
Compliance
UL Listed
Suitable for wet locations. Suitable for use in dwellings. Suitable for use with 90°C supply wiring. Complies with UL Standard 1598. For non-hazardous locations where the lamp, socket and wiring require protection from rain, corrosive fumes, non-combustible dusts, moisture, non-explosive vapors and gases.
Electrical
Wattage
See catalog number chart for maximumWage with clear glass, colored glass and Permaglobes
Socket
Premium porcelain with 150°C 8" leads attached. Fastened with 2 stainless steel screws.
Maximum Watts
200W
Colored Globe Maximum Watts
150W
Construction
Globes
Supplied with clear heat resistant glass globes unless otherwise stated. Colored and white glass globes available. Unbreakable RAB Permaglobes available in clear and in color.
Optional Reflectors
Highly reflective white baked polyester epoxy powder finish over a heavy gauge aluminum base. Reflectors thread onto fixtures. See RV series.
Die Cast Guard
Supplied with one piece die cast guard with set screw
Recently Viewed Products
ALED2T50RG/480/D10/WS4
Arealights 7084 Lumens Aled Type Ii 8In Pole Arm 5000K 50W 480V 0-10V Dimming Multi-Level Sensor With 40 Feet Lens Roadway Gray
ALED3T50SFY/480/D10/7PR
Arealights 6329 Lumens Aled Type Iii Slipfitter 3000K 50W 480V 0-10V Dimming 7-Pin Receptacle Bronze
ALED2T50RG/480/D10/WS4
Arealights 7084 Lumens Aled Type Ii 8In Pole Arm 5000K 50W 480V 0-10V Dimming Multi-Level Sensor With 40 Feet Lens Roadway Gray
