W22-M-100/480/LCBS/MVS
W22-M-100/480/LCBS/MVS
100W
- 100,000-Hour LED lifespan
- 0-10V dimming standard
- 5-Year, limited warranty
Performance
| Watts | 100/85/70/50W |
| Color Temp | |
| Lumens | 5,992-14,496 lm |
| Efficacy | 114.5-158.1 lm/W |
| Color Accuracy | 82-85 CRI |
| L70 Lifespan | 100,000 Hours |
| Type | Constant |
| 120V | |
| 208V | |
| 240V | |
| 277V | |
| Input Watts | 46.6-102.1W |
Dimensions
Weight: 9.5 lbs
Technical Specifications
Lightcloud
Lightcloud Blue Installed
Lightcloud Blue is a Bluetooth Mesh wireless lighting control system that allows you to control RAB's various compatible devices. With RAB's patented Rapid Provisioning technology, devices can be quickly and easily commissioned for residential and large commercial applications using the Lightcloud Blue mobile app. Each device in a system can communicate with any other device, eliminating the need for a Gateway or Hub and maximizing the control system's reach.
DLC system - N1XMLOEATBA (Interior); NHCZ2BIA17L (Exterior)
Learn more at www.rablighting.com/feature/new-lightcloud-blue.
DLC system - N1XMLOEATBA (Interior); NHCZ2BIA17L (Exterior)
Learn more at www.rablighting.com/feature/new-lightcloud-blue.
Gateway Required
No
Communication Protocol
Bluetooth Mesh
SmartShift
No
Range
Indoor: Up to 60 feet between standard building materials. Building materials such as brick, concrete, and steel construction may require additional Lightcloud Blue devices to extend around an obstruction; Up to 200 feet clear line of sight.
Outdoor: Up to 60 feet clear line of sight; Up to 18 feet around corners.
Outdoor: Up to 60 feet clear line of sight; Up to 18 feet around corners.
Spacing Criteria
Lightcloud Blue devices should be placed within the specified range to communicate within the Bluetooth Mesh network.
Factory Reset
Method 1: Delete from App
Open the app and access the device settings for the paired device. Be sure that the device is online and select 'Delete'. The device will flash on/off 3x and return to full brightness.
Method 2: Manual
Locate the device identification button at the top of the Controller under the Lightcloud logo. Press and hold this button for 10s or until the indicator light begins flashing red. If the Controller is attached to a fixture, the fixture will also flash on/off 3x.
Open the app and access the device settings for the paired device. Be sure that the device is online and select 'Delete'. The device will flash on/off 3x and return to full brightness.
Method 2: Manual
Locate the device identification button at the top of the Controller under the Lightcloud logo. Press and hold this button for 10s or until the indicator light begins flashing red. If the Controller is attached to a fixture, the fixture will also flash on/off 3x.
Performance
Product Type
Wall Pack
Description
Field-adjustable wall packs with selectable throw. Available in three sizes, from 15W - 150W. Now available with Lightcloud Blue and integrated occupancy sensor
Wattage Equivalency
100W: Replaces up to 400W Metal Halide (MH) or 310W High Pressure Sodium (HPS)
85W: Replaces up to 400W Metal Halide (MH) or 250W High Pressure Sodium (HPS)
70W: Replaces up to 350W Metal Halide (MH) or 200W High Pressure Sodium (HPS)
50W: Replaces up to 250W Metal Halide (MH) or 200W High Pressure Sodium (HPS)
85W: Replaces up to 400W Metal Halide (MH) or 250W High Pressure Sodium (HPS)
70W: Replaces up to 350W Metal Halide (MH) or 200W High Pressure Sodium (HPS)
50W: Replaces up to 250W Metal Halide (MH) or 200W High Pressure Sodium (HPS)
Input Wattage
100/85/70/50W, factory default 100W
Lumens (Nominal)
15,000/12,750/10,500/7,500lm @ 4000K
Efficacy
150lm/W
Sensor Settings
Lifespan
100,000-Hour LED lifespan based on IESlm-80 results and TM-21 calculations
Sensor Connection Type
Intergrated
Max Mounting Height
8 to 12 feet
Sensor Technology
Microwave (MVS)
Default Setting
Uncommissioned State:
Motion Sensitivity: High
Brightness when triggered : 100%
Hold time: 20 minutes
Standby to dim: 20%
Standby time: 1 minute
When vacant: Off
Daylight Sensing: Disabled
Photocell: Disabled
Commissioned State:
Once pair, the sensor will default to disabled. Once enabled the following settings apply:
Motion Sensitivity: High
Brightness when triggered: Last on status
Hold time: 20 minutes
Standby to dim: 20%
Standby time: 1 minute
When vacant: Off
Daylight Sensing: Disabled
Photocell: Disabled
Motion Sensitivity: High
Brightness when triggered : 100%
Hold time: 20 minutes
Standby to dim: 20%
Standby time: 1 minute
When vacant: Off
Daylight Sensing: Disabled
Photocell: Disabled
Commissioned State:
Once pair, the sensor will default to disabled. Once enabled the following settings apply:
Motion Sensitivity: High
Brightness when triggered: Last on status
Hold time: 20 minutes
Standby to dim: 20%
Standby time: 1 minute
When vacant: Off
Daylight Sensing: Disabled
Photocell: Disabled
Adjustable Sensor Settings?
Yes, using the Lightcloud Blue mobile app
Sensing Type
Occupancy, Vacancy
Occupied Actions
On or On at a Dim Level
Vacant Actions
Off or On at a Dim Level
Occupancy Timeout
1 minute to 240 minutes
Daylight Sensing
Dim levels will continuously adjust based on the daylight threshold level set in the Lightcloud Blue mobile app. Settings adjustable using the Lightcloud Blue mobile ap
Electrical
Driver
Constant Current, Class 2 120-277V 50/60 Hz; 120V: mA; 208V: mA; 240V: mA; 277V: mA
THD
<20%
Power Factor
0.9
Dimmable
Yes via the Lightcloud Blue mobile app and devices.
This product will not operate properly when connected to a standard/0-10V dimmer or dimming control.
This product will not operate properly when connected to a standard/0-10V dimmer or dimming control.
Input Voltage
120-277V
Operating Frequency
50/60Hz
Operating Temperature
-40°F to 104°F (-40°C to -40°C)
Flicker
<30%
Surge Protection
DM 4 kV+ CM 6 kV
Emergency Fixture Use
Yes, can be used as an emergency fixture
Detection Range
20 ft diameter at 9 ft mounting height
Photocell
Integrated photocell included with on/off switch, factory default set to OFF. Once photocell is enabled on the fixture, the settings are adjustable using the Lightcloud Blue mobile app
LED Characteristics
Beam Angle
Adjustable throw (0° , 15° , 30° & 45° ); factory default 45°
Color Temperature
Field adjustable via dip switch 3000/4000/5000K, factory default 4000K
Color Tuning
No, the color cannot be adjusted using the Lightcloud Blue mobile app
Color Accuracy (CRI)
80 CRI
Natural Spectrum
No
Color Consistency
<7-step MacAdam Ellipse binning to achieve consistent fixture-to-fixture color
Installation
Mounting
Suface mount for recessed junction box; 3 conduit entry points
Construction
Size
Medium
Shape
Rectangle
Finish
Bronze
Enclosure Material
Aluminum
Lens Finish
Clear
Lens
Glass
Compliance
Listings
UL Listed, UL Classified
Environment
Suitable for use indoors and outdoors in dry, damp, or wet environments.
Energy Star Approved
No
DLC NLC Listed
This product is on the Design Lights Consortium (DLC) Network Lighting Controls (NLC) Qualified Products List and is eligible for rebates from DLC Member Utilities.
DLC system - N1XMLOEATBA (Interior); NHCZ2BIA17L (Exterior)
DLC system - N1XMLOEATBA (Interior); NHCZ2BIA17L (Exterior)
DLC Listed
This product is on the Design Lights Consortium (DLC) Qualified Products List and is eligible for rebates from DLC Member Utilities. Designed to meet DLC 5.1 requirements.
California Title 20 Compliant
No
California Title 24 JA8 Compliant
No
California Energy Commission (CEC) Status
Lawful for Sales in California
NSF Listed
No
IESNA LM-79 & LM-80 Testing
RAB LED luminaires and LED components have been tested by an independent laboratory in accordance with IESNAlm-79 andlm-80.
RoHS
Mercury and UV free. RoHS-compliant components.
FCC
Complies with Part 15 of the FCC Rules
Other
Compatible Products
Combine with other Lightcloud Blue devices and fixtures to expand your system. Visit rablighting.com/controls/LIGHTCLOUD_BLUE.
Compatible Accessories
W22-[S/M/L]-WG
Wire guard for W22
Wire guard for W22
Recently Viewed Products
ALED4T78N/WS4
Arealights 9804 Lumens Aled Type Iv 8In Pole Arm 4K 78W 120V-277V Multi-Level Sensor With 40 Feet Lens Bronze
HALV10L927-FG1-CU/MVS
Architectural 706 Lumens Halv Forward Light 14W 90Cri 2700K Frosted Lens With Grill Style 1 Copper Finish Microwave Sensor
IVGT5C-70L740Z4/WS
Garage Lights 7417 Lumens Ivgt5C Type V 69W 70Cri 4000K Bronze 480V 0-10V Dimming 8 Feet Lens Wattstopper Sensor
HID-50-EX39-840-BYP-ADJ
Hid Replacements 7500 Lumens Hid 50W Base Ex39 80Cri 4000K Ballast Bypass Adjustable
ALED3T125NW/480/WS2
Arealights 14474 Lumens Aled Type Iii 8In Pole Arm 4000K 125W 480V Multi-Level Sensor With 20 Feet Lens White
IVAT2-75LSF740GU/7PR/LC
Area Lights 7484 Lumens Ivat2 Type Ii 67W Slipfitter Mount 70Cri 4000K Roadway Gray 120V-277V 0-10V Dimming 7-Pin Receptacle Lightcloud Controller
ALED4T78N/WS4
Arealights 9804 Lumens Aled Type Iv 8In Pole Arm 4K 78W 120V-277V Multi-Level Sensor With 40 Feet Lens Bronze
HALV10L927-FG1-CU/MVS
Architectural 706 Lumens Halv Forward Light 14W 90Cri 2700K Frosted Lens With Grill Style 1 Copper Finish Microwave Sensor
IVGT5C-70L740Z4/WS
Garage Lights 7417 Lumens Ivgt5C Type V 69W 70Cri 4000K Bronze 480V 0-10V Dimming 8 Feet Lens Wattstopper Sensor
HID-50-EX39-840-BYP-ADJ
Hid Replacements 7500 Lumens Hid 50W Base Ex39 80Cri 4000K Ballast Bypass Adjustable
