Technical Specifications
Performance
Description
The Phase Dimmer can be used to control standard lighting. Use the up/down paddle to adjust the dim level or turn lights on/off. Indicator lights illuminate to reflect the current brightness levels.
Electrical
Dimming Control Type
Selectable Phase: Forward/Reverse
Load Switching Capactiy
LED/CFL: 300W
INC/HAL/ELV: 500W
MLV: 400VA
Multi-gang Derating
When combining controls in the same wallbox, derating is required.
LED/CFL
Not Ganged: 300W max load
End of Gang: 250W max load
Middle of Gang: 200W max load
INC/HAL/ELV/MLV
Not Ganged: 500W max load
End of Gang: 400W max load
Middle of Gang: 300W max load
Self Calibration
Via dip switch choose a sef calibration option based on the fixtures being controlled:
F - forward phase
A - auto-detect forward/reverse phase
R - reverse phase
Note: after dip switch adjustment, power device off and then power on again.
Power Cut Off Switch
Push in to connect to line voltage.
Pull out to disconnect to line voltage.
Note: after dip switch adjustment, power device off and then power on again.
Operating Frequency
60 Hz
Operating Temperature
32°F to 104°F (0°C to 40°C)
Installation
Mounting
Requires a U.S. wallbox with 2 inch depth (recommended) and a minimum depth of 1.46 inches
Neutral Wire Required
Optional
Application Type
Application Type
Single-pole
3-way mechanical switch
3-way application with normal toggle switch.
Construction
Package Includes
(1) Dimmer
(1) Face plate bracket
(1) Back plate
(2) Mounting screws
(1) Jumper wire
(2) 5-pin wiring terminals
(3) 2-pin wiring terminals
(5) Connection wires
Compliance
Environment
Suitable for indoor use in dry and damp environments
Certification Model Number
XDIM
T20 Compliant
Not applicable
California Title 24 JA8 Compliant
Not applicable
California Energy Commission (CEC) Status
Lawful for Sales in California
RoHS
Mercury and UV free. RoHS-compliant components.
FCC
Complies with Part 15 of the FCC Rules
Other
3 Yr Limited Warranty
The RAB 3-year, limited warranty covers light output, driver performance and paint finish. RAB's warranty is subject to all terms and conditions found at
rablighting.com/warranty
Note
All values are typical (tolerance +/- 10%)
Buy American Act Compliance
RAB values USA manufacturing! Upon request, RAB may be able to manufacture this product to be compliant with the Buy American Act (BAA). Please contact customer service to request a quote for the product to be made BAA compliant.