ALED2T125SFYRG/480/D10
ALED2T125SFYRG/480/D10
- 66% energy cost savings vs. HID
- 100,000-hour LED lifespan
- 5-Year, No-Compromise Warranty
Performance
| Watts | 125W |
| Color Temp | 3000K (Warm) |
| Lumens | 15,059 lm |
| Efficacy | 113.9 lm/W |
| Color Accuracy | 70 CRI |
| L70 Lifespan | 100,000 Hours |
| Type | Constant Current |
| 120V | |
| 208V | |
| 240V | |
| 277V | |
| Input Watts | 132.2W |
Dimensions
Weight: 32.0 lbs
Technical Specifications
Compliance
UL Listed
Suitable for wet locations
DLC Listed
This product is on the Design Lights Consortium (DLC) Qualified Products List and is eligible for rebates from DLC Member Utilities. DLC Product Code: PNHTA4CX
IP Rating
Ingress protection rating of IP66 for dust and water
IESNA LM-79 & LM-80 Testing
RAB LED luminaires and LED components have been tested by an independent laboratory in accordance with IESNA LM-79 and LM-80.
Performance
Lifespan
100,000-Hour LED lifespan based on IES LM-80 results and TM-21 calculations
Wattage Equivalency
Equvalent to 350W Metal Halide
Construction
IES Classification
The Type II distribution is ideal for wide walkways, on ramps and entrance roadways, bike paths and other long and narrow lighting applications. This type is meant for lighting larger areas and usually is located near the roadside. This type of lighting is commonly found on smaller side streets or jogging paths.
Maximum Ambient Temperature
Suitable for use in up to 40°C (104°F)
Cold Weather Starting
The minimum starting temperature is -40°C (-40°F)
Thermal Management
Superior thermal management with external "Air-Flow" fins
Lens
Tempered glass lens
Housing
Die-cast aluminum housing, lens frame and mounting arm
Reflector
Specular vacuum-metallized polycarbonate
Gaskets
High-temperature silicone gaskets
Bracket EPA
2.0.
Finish
Formulated for high durability and long-lasting color
Green Technology
Mercury and UV free. RoHS-compliant components.
LED Characteristics
LEDs
Multi-chip, high-output, long-life LEDs
Color Stability
LED color temperature is warrantied to shift no more than 200K in color temperature over a 5-year period
Color Uniformity
RAB's range of Correlated Color Temperature follows the guidelines of the American National Standard for Specifications for the Chromaticity of Solid State Lighting (SSL) Products, ANSI C78.377-2017.
Electrical
Drivers
Two Drivers, Constant Current, Class 2, 1750mA, 347-480V, 50/60Hz, 0.30A, Power Factor 94.2%
Dimming Driver
Driver includes dimming control wiring for 0-10V dimming systems. Requires separate 0-10V DC dimming circuit. Dims down to 10%. See dimmer compatibility guide here.
THD
14.5% at 480V
Power Factor
94.1% at 480V
Ballast Volts
480V
Surge Protection
4kV
Installation
Mounting
Heavy-duty 1/2" thread mounting arm with "O" ring seal & stainless steel screws
Other
5-Year, No-Compromise Warranty
RAB warrants that our LED products will be free from defects in materials and workmanship for a period of five (5) years from the date of delivery to the end user, including coverage of light output, color stability, driver performance and fixture finish. RAB's warranty is subject to all terms and conditions found at rablighting.com/warranty.
Optical
BUG Rating
B2 U0 G2
Recently Viewed Products
ALED2T125SFYRG/480/D10
Arealights 15059 Lumens Aled Type Ii Slipfitter 3000K 125W 480V 0-10V Dimming Roadway Gray
T8-9-24G-835-SD-BYP
Linear Tubes 1100 Lumens T8 9W 2 Feet Glass 80Cri 3500K Single/Double Ended Ballast Bypass
A17-4T150N/480/3PRS
Arealights 21319.7 Lumens A17 Type Iv 150W 4000K 480V Pole Mount 3-Pin Receptacle With Shorting Cap Bronze
CDLED6WU-20W-80D950-W
Cylinders 1847 Lumens Cdled 20W 6 Inches Wall Indirect (Uplight) Only 90Cri 5000K Matte White
ALED2T125SFYRG/480/D10
Arealights 15059 Lumens Aled Type Ii Slipfitter 3000K 125W 480V 0-10V Dimming Roadway Gray
T8-9-24G-835-SD-BYP
Linear Tubes 1100 Lumens T8 9W 2 Feet Glass 80Cri 3500K Single/Double Ended Ballast Bypass
