NDIC6R20D/E2
NDIC6R20D/E2
- Butterfly bracket allows mounting with bar stock, "C" channel, 1/2" conduit or nailer bars
- Low-profile design allows for installation in ceilings with limited space
- Sturdy design with die cast aperture frame
Performance
| Watts | 20W |
| Color Temp | See Trim Module* |
| Lumens | See Trim Module* |
| Efficacy | See Trim Module* |
| Color Accuracy | 80 CRI |
| L70 Lifespan |
| Type | Constant Current |
| 120V | 0.17A |
| 208V | 0.11A |
| 240V | 0.10A |
| 277V | 0.09A |
| Input Watts | See Trim Module* |
Dimensions
Weight: 4.8 lbs
Technical Specifications
Compliance
UL Listed
Suitable for wet locations covered ceiling
IC Rated
Suitable for direct contact with insulation
Energy Star Approved
ENERGY STAR® Version 2.0 Certified
Construction
Housing Component
This component must be ordered with New Construction Round Trim Module in order to make a complete fixture.
See here for New Construction Round Trim Module.
See here for New Construction Round Trim Module.
Insulation Contact (IC)
Allows direct contact with insulation or keep insulation 3" from fixture at all times
Ambient Temperature
Suitable for use in up to 104°F (40°C)
Cold Weather Starting
The minimum starting temperature is -40°F (-40°C)
Aperture Size
6" Rough-In
Drop Ceiling Installation
NDLED can be installed in drop ceiling tiles when using optional c-channel bars and following local construction codes
Junction Box
Integral junction box with wiring capacity for
Min 90°C supply conductors
4 in 4 out
Min 90°C supply conductors
4 in 4 out
Air Tight
Housing certified Air Tight as per ASTM-E283
Easy Installation
The EZConnector makes installation easy
Thermal Protector
Thermal protector included. Disables power if temperature exceeds safe operation levels.
Electrical
Driver
ELV, 0-10V and TRIAC Dimming, Constant Current, Class 2, 120V-277V, 50/60Hz, Power Factor 98%, THD ≤ 20%
Dimming Driver
0 - 10V (at 120-277V), TRIAC and ELV (at 120V only). See dimmer compatibility guide here.
Battery Backup
Battery backup will operate the LED Lamp for 90 minutes if power fails. Wired for 120V.
Performance
Wattage Equivalency
Equivalent to 100W PAR
Installation
Mounting
Housing includes nailer bars and butterfly brackets. Brackets also accommodate mounting with 1/4" to 1/2" bar stock, C channel or 1/2" conduit.
Other
5-Year, No-Compromise Warranty
RAB warrants that our LED products will be free from defects in materials and workmanship for a period of five (5) years from the date of delivery to the end user, including coverage of light output, color stability, driver performance and fixture finish. RAB's warranty is subject to all terms and conditions found at rablighting.com/warranty.
Recently Viewed Products
IVAT2-100LWM730GU/WS2
Area Lights 10167 Lumens Ivat2 Type Ii 94W Wall Mount 70Cri 3000K Roadway Gray 120V-277V 0-10V Dimming 20 Feet Lens Wattstopper Sensor
IVAT5S-130LSF750ZU/7PR/LC
Area Lights 14494 Lumens Ivat5S Type V Square 117W Slipfitter Mount 70Cri 5000K Bronze 120V-277V 0-10V Dimming 7-Pin Receptacle Lightcloud Controller
GN5LED26YRAD11B
Decorative 809 Lumens Gooseneck 26W 3000K Pole 20 Inches High & 19 Inches From Pole Angled Dome Rectangular 11 Inches Black
IVAFT-45LPA750ZU/7PR
Area Lights 4928 Lumens Ivaft Forward Throw 38W Universal Pole Mount 70Cri 5000K Bronze 120V-277V 0-10V Dimming 7-Pin Receptacle
IVAT2-100LWM730GU/WS2
Area Lights 10167 Lumens Ivat2 Type Ii 94W Wall Mount 70Cri 3000K Roadway Gray 120V-277V 0-10V Dimming 20 Feet Lens Wattstopper Sensor
IVAT5S-130LSF750ZU/7PR/LC
Area Lights 14494 Lumens Ivat5S Type V Square 117W Slipfitter Mount 70Cri 5000K Bronze 120V-277V 0-10V Dimming 7-Pin Receptacle Lightcloud Controller
