• Surge protected
  • 180°detection pattern
  • Quick installation with 5 second test time and auto test logic
  • LED "on guard" indicator
  • Protected manual override with auto reset after 8 hours or at dawn
View Technical Specs
Dimensions
Link to Dimension Drawing

Weight: 0.4 lbs

Technical Specifications
Compliance
UL Listed
Suitable for wet locations
Other
Compatibility
Compatible with most electronic ballasts. Not compatible with instant start ballasts.
Warranty
5-year sensor warranty
Electrical
Voltage
120V AC 60Hz
Manual Override
Double flip wall switch logic prevents activation by brief power outages. Resets after 6 hours. No extra wiring needed.
Surge Protection
Withstands up to 3000 volts
RF Immunity
Circuits fully shielded for maximum radio frequency immunity
Incandescent Watts Switched
500W @ 120 volts
Fluorescent Watts Switched
250W @ 120 volts
Ratings
5 amps
Power Consumption
Negligible
Manual Switch
None
Switching Capacity
Relay On/Off Model Switches 240W when lights are mounted to sensor. 500W Incandescent or 240W Fluorescent of remotely mounted lighting @ 120 volts.
Sensor Settings
Time Adjustment
5 seconds to 15 minutes
Quick Test Time
5 second test time for fast installation. Works day or night.
"No Hands" Auto Testing
Auto mode starts after 4 minutes of testing. No adjustment needed.
Photoelectric Control
Deactivates lights during daylight. Fully adjustable for 24 hour operation or custom applications.
Time Delay
5 seconds to 15 minutes
Ambient Light Sensing
Adjustable
Adjustments
Time, ambient light & sensitivity
Detection
180° detection pattern
LED Characteristics
LED Detection Indicator
LED glows red day & night for "on guard" deterrence

Recently Viewed Products

 This is a link to the product DAISYKIT4B DAISYKIT4B
4" Daisy Chain Wafer Kit 6Pcs 54W Cri90 5Cct Baffle 0-10V Dim 120-277V Driver+50Ft Cord
 This is a link to the product MR16-5-930-15D-DIM-G2 MR16-5-930-15D-DIM-G2
Small Reflectors 400 Lumens Mr16 5W 90Cri 3000K Dimmable Gen 2
 This is a link to the product RDDLED2S-10D-WYY-M-SATL RDDLED2S-10D-WYY-M-SATL
Recessed Downlights 724 Lumens Rddled 2 Inches Square 10W Dimmable Wall Wash 2700K 80Cri Matte Trim Cone Satin Nickel Trim Ring Trimless
 This is a link to the product B11-5-E12-940-F-C B11-5-E12-940-F-C
Decorative 500 Lumens B11 5W Base E12 90Cri 4000K Filament Clear
 This is a link to the product RDDLED2R-10D-30Y-S-SATL RDDLED2R-10D-30Y-S-SATL
Recessed Downlights 919 Lumens Rddled 2 Inches Round 10W Dimmable 30 Degree 3000K 80Cri Specular Trim Cone Satin Nickel Trim Ring Trimless
 This is a link to the product PS4-11-20D2 PS4-11-20D2
Poles Ps4 Square Pole 4 Inch 11 Gauge 20 Feet Drilled
 This is a link to the product DAISYKIT4B DAISYKIT4B
4" Daisy Chain Wafer Kit 6Pcs 54W Cri90 5Cct Baffle 0-10V Dim 120-277V Driver+50Ft Cord
 This is a link to the product MR16-5-930-15D-DIM-G2 MR16-5-930-15D-DIM-G2
Small Reflectors 400 Lumens Mr16 5W 90Cri 3000K Dimmable Gen 2
 This is a link to the product RDDLED2S-10D-WYY-M-SATL RDDLED2S-10D-WYY-M-SATL
Recessed Downlights 724 Lumens Rddled 2 Inches Square 10W Dimmable Wall Wash 2700K 80Cri Matte Trim Cone Satin Nickel Trim Ring Trimless
 This is a link to the product B11-5-E12-940-F-C B11-5-E12-940-F-C
Decorative 500 Lumens B11 5W Base E12 90Cri 4000K Filament Clear
Link to Live Chat

Contact us

A RAB support representative will respond soon.

Send a message
Link to Lighting Design

Lighting Design

Our lighting designers can help you create a custom layout.

Request Lighting Layout
Link to DLC qualified products

DesignLights Consortium®

Find DLC qualified products.

Learn More
Link to Where to Buy

Where to Buy

Find a distributor or RAB Sales Representative.

Go to Locator