• Fits the footprint of older canopy lights
  • Vandal resistant and UV resistant lens
  • Ultra-high efficiency
  • Clean, contemporary, low-profile design
  • Available with drop lens or flat lens
  • IP66 rated, keeps dust, bugs and water out
  • Photo and motion sensor options available
View Technical Specs
Performance
Watts 75W
Color Temp 5000K (Cool)
Lumens 9,004 lm
Efficacy 128.8
Color Accuracy 84 CRI
L70 Lifespan 100,000 Hours
Type Constant Current
120V 0.63A
208V 0.36A
240V 0.32A
277V 0.27A
Input Watts 69.9W
Dimensions
Link to Dimension Drawing

Weight: 11.5 lbs

Technical Specifications
Compliance
UL Listed
Suitable for Wet Locations. Covered Ceiling Mount Only.
IESNA LM-79 & LM-80 Testing
RAB LED luminaires and LED components have been tested by an independent laboratory in accordance with IESNAlm-79 andlm-80.
IP Rating
Ingress protection rating of IP66 for dust and water
DLC Listed
This product is listed by Design Lights Consortium (DLC) as an ultra-efficient premium product that qualifies for the highest tier of rebates from DLC Member Utilities. Designed to meet DLC 5.1 requirements.
DLC Product Code: PDBPTFO7 (DLC Premium: Stairwell and Passageway Luminaires)
DLC Product Code: S-75F18R (DLC Standard: Canopy Lighting)
Electrical
Driver
Class 2, Constant Current, 120-277V, 50-60Hz, 120V: 0.63A, 208V: 0.36A, 240V: 0.32A, 277V: 0.27A
Dimming Driver
Driver includes dimming control wiring for 0-10V dimming systems. Requires separate 0-10V DC dimming circuit. Dims down to 10%.
THD
2.53% at 120V, 5.72% at 277V
Power Factor
99.77% at 120V, 95.68% at 277V
LED Characteristics
LEDs
Long-life, high-efficacy, surface-mount LEDs
Color Stability
RAB LEDs exceed industry standards for chromatic stability
Color Uniformity
RAB's range of Correlated Color Temperature follows the guidelines of the American National Standard for Specifications for the Chromaticity of Solid State Lighting (SSL) Products, ANSI C78.377-2017.
Construction
Maximum Ambient Temperature
Suitable for use in up to 75°C (167°F)
Cold Weather Starting
The minimum starting temperature is -40°F (-40°C)
Lens
Vandal-resistant polycarbonate textured opaque for low glare frosted drop lens
Housing
Die-cast aluminum housing and lens frame with (4) 1/2" NPS side conduit entries and weatherproof rear wire plug and access plate
Air Tight
Housing certified Air Tight as per ASTM-E283
Finish
Our environmentally friendly polyester powder coatings are formulated for high-durability and long-lasting color
Installation
Mounting
Ceiling mount to recessed junction with knockout template or directy to ceiling surface, utilizing side conduit entry points
Sensor Settings
Capacitance Load
400VA at 120VAC, 800VA at 230VAC, 1000VA at 277VAC
Operating Temperature
-4°F to +140°F(-20°C to +60°C )
Relay
Zero-cross relay
Maximum Mounting Height
16.4 ft
Customizable Detection Area
10, 50, 75 or 100%
Time Delay
5s, 30s, 1min, 5min, 10min, 20min, 30min
Cut Off Period
0s, 10s, 1min, 5min, 10min, 30min, 1hr, Bi-Level
Cut-Off Dimming level
10, 20, 30, 50%
Cut-Off Power
Less than 1W
Daylight Threshold
About .2-5 fc for disabled
Sensor Principle
High Frequency
Microwave Frequency
5.8GHz +/- 75MHz
Microwave Power
<0.2mW
Max Detection Range
26 ft diameter at 16 ft mounting height
Detection Angle
About 30 to 150 degrees
Remote Control Accessory
Adjust settings using remote control (catalog# MVSREM). Only available with 0-10V dimming driver options. Remote control available here.
Other
5-Year, No-Compromise Warranty
RAB warrants that our LED products will be free from defects in materials and workmanship for a period of five (5) years from the date of delivery to the end user, including coverage of light output, color stability, driver performance and fixture finish. RAB's warranty is subject to all terms and conditions found at rablighting.com/warranty.
Performance
Wattage Equivalency
Equivalent to 250W Metal Halide

Recently Viewed Products

 This is a link to the product BLED24/E BLED24/E
Bollard Emergency Battery 24W Cool Square 120 277V 42" Lbackup Bronze
 This is a link to the product X34-100LTW/U X34-100LTW/U
Floodlights 11905 Lumens X34 87W Trunnion Mount 80Cri 5000K White 120V-277V 0-10V Dimming
 This is a link to the product PIPXL70SFY/D10 PIPXL70SFY/D10
Flood 10783 Lumens Pip Xl 70W Warm Led 120V-277V 0-10V Dimming Lc Slipfitter Bronze
 This is a link to the product PIPXL70TY/480/D10 PIPXL70TY/480/D10
Flood 10129 Lumens Pip Xl 70W Warm Led 480V 0-10V Dimming Trunnion Bronze
 This is a link to the product HALV10L930-MA-CU HALV10L930-MA-CU
Architectural 151 Lumens Halv Forward Light 14W 90Cri 3000K Mirage Bronze Lens Copper Finish
 This is a link to the product IVAT3-75LSF740GU IVAT3-75LSF740GU
Area Lights 7485 Lumens Ivat3 Type Iii 67W Slipfitter Mount 70Cri 4000K Roadway Gray 120V-277V 0-10V Dimming
 This is a link to the product BLED24/E BLED24/E
Bollard Emergency Battery 24W Cool Square 120 277V 42" Lbackup Bronze
 This is a link to the product X34-100LTW/U X34-100LTW/U
Floodlights 11905 Lumens X34 87W Trunnion Mount 80Cri 5000K White 120V-277V 0-10V Dimming
 This is a link to the product PIPXL70SFY/D10 PIPXL70SFY/D10
Flood 10783 Lumens Pip Xl 70W Warm Led 120V-277V 0-10V Dimming Lc Slipfitter Bronze
 This is a link to the product PIPXL70TY/480/D10 PIPXL70TY/480/D10
Flood 10129 Lumens Pip Xl 70W Warm Led 480V 0-10V Dimming Trunnion Bronze
Link to Live Chat

Contact us

A RAB support representative will respond soon.

Send a message
Link to Lighting Design

Lighting Design

Our lighting designers can help you create a custom layout.

Request Lighting Layout
Link to DLC qualified products

DesignLights Consortium®

Find DLC qualified products.

Learn More
Link to Where to Buy

Where to Buy

Find a distributor or RAB Sales Representative.

Go to Locator