VANLED20YFRW/MVS
VANLED20YFRW/MVS
- Fits the footprint of older canopy lights
- Vandal resistant and UV resistant lens
- Ultra-high efficiency
- Clean, contemporary, low-profile design
- Available with drop lens or flat lens
- IP66 rated, keeps dust, bugs and water out
- Photo and motion sensor options available
Performance
| Watts | 20W |
| Color Temp | 3000K (Warm) |
| Lumens | 2,743 lm |
| Efficacy | 121.3 |
| Color Accuracy | 84 CRI |
| L70 Lifespan | 100,000 Hours |
| Type | Constant Current |
| 120V | 0.20A |
| 208V | 0.11A |
| 240V | 0.10A |
| 277V | 0.09A |
| Input Watts | 22.6W |
Dimensions
Weight: 11.5 lbs
Technical Specifications
Compliance
UL Listed
Suitable for Wet Locations. Covered Ceiling Mount Only.
IESNA LM-79 & LM-80 Testing
RAB LED luminaires and LED components have been tested by an independent laboratory in accordance with IESNA LM-79 and LM-80.
IP Rating
Ingress protection rating of IP66 for dust and water
DLC Listed
This product is listed by Design Lights Consortium (DLC) as an ultra-efficient premium product that qualifies for the highest tier of rebates from DLC Member Utilities. Designed to meet DLC 5.1 requirements.
DLC Product Code: PAPUX30W (DLC Premium: Stairwell and Passageway Luminaires)
DLC Product Code: S-VK7HMG (DLC Standard: Canopy Lighting)
DLC Product Code: PAPUX30W (DLC Premium: Stairwell and Passageway Luminaires)
DLC Product Code: S-VK7HMG (DLC Standard: Canopy Lighting)
Electrical
Driver
Class 2, Constant Current, 120-277V, 50-60Hz, 120V: 0.20A, 208V: 0.11A, 240V: 0.10A, 277V: 0.09A
Dimming Driver
Driver includes dimming control wiring for 0-10V dimming systems. Requires separate 0-10V DC dimming circuit. Dims down to 10%.
THD
13.92% at 120V, 10.69% at 277V
Power Factor
98.6% at 120V, 95.8% at 277V
LED Characteristics
LEDs
Long-life, high-efficacy, surface-mount LEDs
Color Stability
RAB LEDs exceed industry standards for chromatic stability
Color Uniformity
RAB's range of Correlated Color Temperature follows the guidelines of the American National Standard for Specifications for the Chromaticity of Solid State Lighting (SSL) Products, ANSI C78.377-2017.
Construction
Maximum Ambient Temperature
Suitable for use in up to 70°C (158°F)
Cold Weather Starting
The minimum starting temperature is -40°C (-40°F)
Lens
Vandal-resistant polycarbonate textured opaque for low glare frosted drop lens
Housing
Die-cast aluminum housing and lens frame with (4) 1/2" NPS side conduit entries and weatherproof rear wire plug and access plate
Mounting
Ceiling mount to recessed junction with knockout template or directy to ceiling surface, utilizing side conduit entry points
Air Tight
Housing certified Air Tight as per ASTM E283
Finish
Our environmentally friendly polyester powder coatings are formulated for high-durability and long-lasting color
Sensor Specifications
Capacitance Load
400VA at 120VAC, 800VA at 230VAC, 1000VA at 277VAC
Operating Temperature
-20°C to +60°C (-4°F to +140°F)
Relay
Zero-cross relay
Maximum Mounting Height
16.4 feet
Customizable Detection Area
10, 50, 75 or 100%
Time Delay
5s, 30s, 1min, 5min, 10min, 20min, 30min
Cut Off Period
0s, 10s, 1min, 5min, 10min, 30min, 1hr, Bi-Level
Cut-Off Dimming level
10, 20, 30, 50%
Cut-Off Power
Less than 1W
Daylight Threshold
About .2-5 fc for disabled
Sensor Principle
High Frequency
Microwave Frequency
5.8GHz +/- 75MHz
Microwave Power
<0.2mW
Max Detection Range
26 ft diameter at 16 ft mounting height
Detection Angle
About 30 to 150 degrees
Remote Control Accessory
Adjust settings using remote control (catalog# MVSREM). Only available with 0-10V dimming driver options. Remote control available here.
Other
Warranty
RAB warrants that our LED products will be free from defects in materials and workmanship for a period of five (5) years from the date of delivery to the end user, including coverage of light output, color stability, driver performance and fixture finish. RAB's warranty is subject to all terms and conditions found at rablighting.com/warranty.
Buy American Act Compliance
RAB values USA manufacturing! Upon request, RAB may be able to manufacture this product to be compliant with the Buy American Act (BAA). Please contact customer service to request a quote for the product to be made BAA compliant.
Performance
Wattage Equivalency
Equivalent to 100W Metal Halide
Recently Viewed Products
VANLED20YFRW/MVS
Canopy Lights 2743 Lumens Vanled 20W 3000K 120V-277V Frosted Lens Microwave Sensor White
A17-5T300/7PRS
Arealights 41099.9 Lumens A17 Type V 300W Led 120V-277V Pole Mt 7-Pin Receptacle Shorting Cap Bronze
FFLED230TYB55W/480/D10
Flood 30168 Lumens Ffled 230W 5Hx5V 3000K Warm Led 480V 0-10V Dimmingmable Trunnion White
FFLED230SFYB55/D10/LC
Flood 30663 Lumens Ffled 230W 5Hx5V 3000K Warm Led 120V-277V 0-10V Dimmingmable Lightcloud Controller Slipfitter Bronze
VANLED20YFRW/MVS
Canopy Lights 2743 Lumens Vanled 20W 3000K 120V-277V Frosted Lens Microwave Sensor White
A17-5T300/7PRS
Arealights 41099.9 Lumens A17 Type V 300W Led 120V-277V Pole Mt 7-Pin Receptacle Shorting Cap Bronze
FFLED230TYB55W/480/D10
Flood 30168 Lumens Ffled 230W 5Hx5V 3000K Warm Led 480V 0-10V Dimmingmable Trunnion White
