SWISHFA-ISLAND2X4/MVS/E
SWISHFA-ISLAND2X4/MVS/E
39W Field Adjustable
- Field-adjustable light output (3 discrete steps)
- White tunable (2 discrete color temperatures)
- 100,000-Hour LED lifespan
- 5-Year, No-Compromise Warranty
Performance
| Watts | 39W |
| Color Temp | Field Adjustable |
| Lumens | 3537-5561 lm |
| Efficacy | 116.5-125.5 lm/W |
| Color Accuracy | 83 CRI |
| L70 Lifespan | 100,000 Hours |
| Type | Constant Current |
| 120V | 0.33A |
| 208V | 0.19A |
| 240V | 0.17A |
| 277V | 0.14A |
| Input Watts | 28.5-47.1W |
Dimensions
Weight: 18.5 lbs
Technical Specifications
Field Adjustability
Field Adjustable
Field Adjustable Light Output:
2' x 4': 49W/39W/29W (factory default 39W)
Color temperature (selectable by 3500K and 4000K)
2' x 4': 49W/39W/29W (factory default 39W)
Color temperature (selectable by 3500K and 4000K)
Compliance
UL Listed
Suitable for dry and damp locations.
CCEA Compliant
Luminaire Requirements used in Environmental Air Space per the electrical code specification of the City of Chicago
IESNA LM-79 & LM-80 Testing
RAB LED luminaires and LED components have been tested by an independent laboratory in accordance with IESNA LM-79 and LM-80.
IC Rated
Suitable for direct contact with insulation
DLC Listed
This product family is listed with the DesignLights Consortium (DLC). Individual SKUs within this family may carry either a DLC Standard or DLC Premium qualification. Please refer to the individual product specification sheet or the DLC Qualified Products List (QPL) at designlights.org to confirm the qualification status of a specific SKU prior to specification or purchase.
Performance
Lifespan
100,000-Hour LED lifespan based on IESlm-80 results and TM-21 calculations
Wattage Equivalency
Equivalent to (3) F32T8 or (3) F28T5
Electrical
Drivers
Class 2, Constant Current, 120-277V, 50/60Hz
29W: 120V: 0.25A, 208V: 0.14A, 240V: 0.12A, 277V: 0.11A
39W: 120V: 0.33A, 208V: 0.19A, 240V: 0.17A, 277V: 0.14A
49W: 120V: 0.41A, 208V: 0.24A, 240V: 0.21A, 277V: 0.18A
29W: 120V: 0.25A, 208V: 0.14A, 240V: 0.12A, 277V: 0.11A
39W: 120V: 0.33A, 208V: 0.19A, 240V: 0.17A, 277V: 0.14A
49W: 120V: 0.41A, 208V: 0.24A, 240V: 0.21A, 277V: 0.18A
Dimming Driver
Driver includes dimming control wiring for 0-10V dimming systems. Requires separate 0-10V DC dimming circuit. Dims down to 10%.
THD
2.93% at 120V, 5.63% at 277V
Power Factor
99.69% at 120V, 95.2% at 277V
Surge Protection
2 kV
Battery Backup
Battery backup will operate the LED Lamp for 90 minutes if power fails. Wired for 120V-277V.
Battery Backup Light Loss Factor
29W: 0.67
39W: 0.50
49W: 0.42
39W: 0.50
49W: 0.42
LED Characteristics
LEDs
Long-life, high-efficacy, discrete, surface-mount LEDs
Color Stability
LED color temperature is warrantied to Shift no more than 200K in color temperature over a 5-year period
Color Uniformity
RAB's range of Correlated Color Temperature follows the guidelines of the American National Standard for Specifications for the Chromaticity of Solid State Lighting (SSL) Products, ANSI C78.377-2017.
Construction
Operating Temperature
-4°F(-20°C) to 104°F (40°C )
Housing
Galvanized sheet metal
Reflector
Aluminum with high reflectance white finish, optimized for uniform distribution.
Lens
Frosted polystyrene
Finish
Formulated for high durability and long-lasting color
Green Technology
Mercury and UV free. RoHS-compliant components.
Installation
Mounting
Recessed into T-grid ceiling. Surface and recessed mounting kits available for drywall ceilings.
Sensor Settings
Capacitance Load
400VA at 120VAC, 800VA at 230VAC, 1000VA at 277VAC
Operating Temperature
-4°F to +140°F(-20°C to +60°C )
Relay
Zero-cross relay
Maximum Mounting Height
16.4 ft
Customizable Detection Area
10, 50, 75 or 100%
Time Delay
5s, 30s, 1min, 5min, 10min, 20min, 30min
Cut Off Period
0s, 10s, 1min, 5min, 10min, 30min, 1hr, Bi-Level
Cut-Off Dimming level
10, 20, 30, 50%
Cut-Off Power
Less than 1W
Daylight Threshold
About .2-5 fc for disabled
Sensor Principle
High Frequency
Microwave Frequency
5.8GHz +/- 75MHz
Microwave Power
<0.2mW
Max Detection Range
26 ft diameter at 16 ft mounting height
Detection Angle
About 30 to 150 degrees
Remote Control Accessory
Adjust settings using remote control (catalog# MVSREM). Only available with 0-10V dimming driver options. Remote control available here.
Other
5-Year, No-Compromise Warranty
RAB warrants that our LED products will be free from defects in materials and workmanship for a period of five (5) years from the date of delivery to the end user, including coverage of light output, color stability, driver performance and fixture finish. RAB's warranty is subject to all terms and conditions found at rablighting.com/warranty.
Recently Viewed Products
VANLED28NFW/PCS
Canopy Lights 4065 Lumens Vanled 28W 4000K Flat Clear Lens 120V Swivel Photocell White
IVAT4-75LSF740WU/WS4
Area Lights 7353 Lumens Ivat4 Type Iv 67W Slipfitter Mount 70Cri 4000K White 120V-277V 0-10V Dimming 40 Feet Lens Wattstopper Sensor
ALED2T125Y/480/D10/WS2
Arealights 15059 Lumens Aled Type Ii 8In Pole Arm 3000K 125W 480V 0-10V Dimming Multi-Level Sensor With 20 Feet Lens Bronze
VANLED28NFW/PCS
Canopy Lights 4065 Lumens Vanled 28W 4000K Flat Clear Lens 120V Swivel Photocell White
IVAT4-75LSF740WU/WS4
Area Lights 7353 Lumens Ivat4 Type Iv 67W Slipfitter Mount 70Cri 4000K White 120V-277V 0-10V Dimming 40 Feet Lens Wattstopper Sensor
ALED2T125Y/480/D10/WS2
Arealights 15059 Lumens Aled Type Ii 8In Pole Arm 3000K 125W 480V 0-10V Dimming Multi-Level Sensor With 20 Feet Lens Bronze
